Content
Summer grass mowing is a common activity for homeowners. A Husqvarna lawn mower will help make the process as convenient as possible, the operation of which does not cause any difficulties. Information about the design and technical characteristics of the Husqvarna lawn mower will facilitate the familiarization stage and help you quickly get comfortable in the initial stages of use.
Purpose and technical characteristics of lawn mowers
The use of a self-propelled lawn mower does not guarantee high-quality work results if there are hard-to-reach places on the plot, uneven ground, or the presence of numerous obstacles in the form of plantings or stumps. In such cases, a manual trimmer will come to the rescue. Among the numerous models, experts recommend paying attention to the product of the Swedish company, the Husqvarna 128r lawnmower.
The Husqvarna brush cutter is designed for cultivating small to medium-sized areas. It is indispensable when it is necessary to remove grass in the area of borders and flower beds. The predecessor of the 128r model is considered to be the Husqvarna 125r brush cutter, the high resource of which, combined with an affordable price, attracted a wide range of buyers. The result of minor modifications to the design of the lawn mower over the course of two years was an improved design in the form of the Husqvarna 128r model.
Main technical characteristics of the lawn mower:
Characteristics | Model 128r |
|---|---|
Engine power | 0.8 kW, equivalent to 1.1 hp. |
Maximum rotation speed | 11000 rpm |
Cylinder volume | 28cm cu. |
Maximum permissible processing width in 1 pass | 0.45 m |
Unit weight (without protective casing, cutting parts and fuel) | 4.8 kg |
Tank capacity of Husqvarna lawn mower | 400 ml |
Fuel consumption | 507 g/kWh |
Rod length | 1.45 m |
Knife diameter | 25.5 cm |
Noise level emitted by Husqvarna lawn mower | About 110 dB |
Quick start of the Husqvarna lawn mower after a long period of inactivity is ensured by the “Smart Start” system and a primer for pumping fuel. The straight shaft and the shape of the handles, identical to bicycle ones, allow for improved control over movements during operation. Compared to curved shapes, a straight mower shaft is considered more reliable. The ability to fold the bicycle handles makes it easy to transport the Husqvarna lawnmower. Control over the fuel level is available thanks to the white plastic fuel tank of the lawn mower. To put the unit into working condition, just pull the cord without much sharpness. The Husqvarna 128 r requires 40% less starting effort.
Setting up a lawn mower and preparing for work
The Husqvarna 128 r brush cutter is equipped as follows:
- a knife with four blades is designed for removing tall and tough grass, as well as small bushes;
- semi-automatic trimmer head;
- rod and protective casing;
- bicycle handle;
- set of keys;
- shoulder straps for carrying the Husqvarna 128 r lawn mower.
Operating the Husqvarna brush cutter using a fishing line is only possible for mowing fine grass.
The instruction manual or the recommendations below will help you assemble the Husqvarna lawn mower, following which the process will take no more than a quarter of an hour:
- Initially, two screws are used to secure the manual control column into place.
- Cables are connected.
- The handle is also mounted on the stand of the Husqvarna lawn mower using screws.
- Next, a protective shield is attached to the Husqvarna lawn mower, the purpose of which is to reduce contamination from the mown grass.
To operate the engine of the Husqvarna lawn mower, you need to prepare a mixture of 1 liter of AI92 gasoline and 50 grams. special oil, after which it is poured into the tank. At the beginning of a cold start, you need to open the throttle three quarters using the control handle.
To prevent the Husqvarna lawn mower from damaging surrounding objects or the operator himself, it must be placed in a safe position before starting work. Then you can pull the recoil starter cord. At the very beginning of the process, the procedure must be repeated 3-4 times. Like all new engines, the Husqvarna lawnmower unit needs to be run in. To do this, it must run for a quarter of an hour at idle speed. After which you can proceed directly to mowing the grass with a brush cutter.
Features of operation
To ensure that using a Husqvarna brush cutter is as convenient as possible, the following recommendations will help:
- Before mowing begins, the suspension system is adjusted to ensure proper fit.
- It is optimal when, after adjustment, the body of the Husqvarna lawn mower with the arms in a half-bent position does not reach the soil surface by 10-15 cm. Working with a Husqvarna lawn mower without the use of a suspension system is not only burdensome, but also significantly increases the risk of injury.
- The significant noise of a running Husqvarna lawn mower creates some discomfort. Using a helmet or headphones will help reduce the side effect.
Within an hour, the unit is capable of mowing grass on a plot of about 2 acres. Taking into account the breaks required to cool the engine of the Husqvarna lawn mower, it will take 4 hours to clean an area with a classic six hundred square meters.
It is quite possible to fix minor breakdowns of a Husqvarna lawn mower yourself. If there is a problem with ignition, spark plugs deserve attention. If they are dry, it is worth trying to adjust the carburetor. Perhaps the situation is caused by improper starting of the Husqvarna lawnmower. Carefully re-reading the instruction manual will help resolve the problem. It is not difficult to change the air filter of a brush cutter, which is prone to clogging over time. It is better to entrust the elimination of more complex breakdowns to professionals.
With regular preventive inspection, timely replacement of damaged parts and compliance with operating conditions, the Husqvarna lawn mower will last for a long period.
