Content
The Dairy Farm milking machine is presented on the domestic market in two models. The units have the same characteristics and design. The difference is a minor design change.
Advantages and disadvantages of milking machines Dairy Farm
The advantages of milking equipment reflect its distinctive features:
- the piston-type pump is characterized by efficient operation;
- The stainless steel milk collection can is resistant to oxidation and corrosion;
- metal rims on the rear and front wheels allow you to transport the unit on a bad path with bumps;
- the special anatomical shape of the elastic silicone inserts ensures gentle contact with the cow’s udder;
- the aluminum motor housing has increased heat transfer, thereby increasing the wear resistance of working units;
- Cleaning brushes are included with the device;
- Factory plywood packaging protects the equipment from damage during transportation.
Users consider the increased noise level to be a disadvantage of the Dairy Farm. A stainless steel can increases the overall weight of the milking machine.
The lineup
On the domestic market, the Dairy Farm model range is represented by 1P and 2P devices. The technical characteristics of the units are the same. There is a slight difference in design. Video testing of the Dairy Farm:
Milking machine Dairy Farm model 1P
The main modules of the Dairy Farm milking machine are: a pump, a can for collecting milk, and an engine. All components are installed on the frame. The milking process itself is carried out using attachments. For model 1P, the transport handle is equipped with a bracket. The device is used for hanging attachments during storage and transportation of the device.
A pulsator is responsible for the process of expressing milk in many milking units. The 1P Dairy Farm model has a simplified design. The device does not have a pulsator. Its work is replaced by a piston pump. The frequency of movement of the pistons in 1 minute is 64 strokes. The squeezing of the udder teat is similar to manual milking or suckling by the calf. The gentle operation of the apparatus creates comfort for the cow. Replacing the pulsator with a piston pump allowed the manufacturer to significantly reduce the cost of the milking unit.
The 1P device is equipped with a motor powered by a 220 volt power supply. The aluminum body has excellent heat dissipation, which eliminates the possibility of overheating and rapid wear of working parts. The engine is attached to the milking machine frame on top of the wheels. The openness of the case allows for additional air cooling.The motor power of 550 W is enough for uninterrupted milking.
The 1P model piston pump drives a connecting rod. The element is connected to the motor by a belt drive. A vacuum hose for air intake is connected to the pump. Its second end is connected to the fitting on the lid of the can. To carry out the milking process, the machine is equipped with a vacuum valve. The unit is installed on the can lid. The pressure level is regulated by a vacuum gauge.
Model 1P has a set of glasses for one cow. More than one animal must not be connected to the milking equipment at the same time. The glasses are connected to the system by transparent hoses made of food-grade polymer. There are elastic inserts inside the cases. The cups stick to the udder using silicone suction cups. The transparency of the transport hoses allows you to visually monitor the movement of milk through the system.
The weight of the 1P model is 45 kg. The can holds 22.6 liters of milk. The container is securely installed on the support platform of the milking machine. The can is securely fixed, which eliminates the possibility of tipping over.
The 1P device is started from idle. In this state it works for at least 5 minutes. During this period of time, a full inspection is performed. Make sure there are no extraneous noises, oil leaks from the gearbox, air leaks from the connections, check the reliability of fixation of all clamps. Identified problems are corrected, and only after that they begin to use the milking equipment for its intended purpose.
Milking machine Dairy Farm model 2P
A slightly improved analogue of the 1P model is the 2P milking machine. Among the technical characteristics, the following indicators can be distinguished:
- the overall productivity of the 2P model is from 8 to 10 cows per 1 hour;
- operation of the electric motor from a 220 volt power supply;
- motor power 550 W;
- milk container capacity 22.6 l;
- weight of the fully equipped equipment is 47 kg.
From the technical characteristics we can conclude that models 1P and 2P are almost identical. Both devices are reliable, maneuverable, and equipped with a piston pump. A distinctive feature of the 2P device is a double handle, more convenient for transportation. The 1P model has one control knob.
The double handle of the device similarly has a bracket for hanging attachments. All working nodes are freely accessible. If necessary, they are easy to maintain and replace.
The manufacturer completes the 2P device with the following elements:
- silicone vacuum pipes – 4 pieces;
- three brushes for washing equipment;
- silicone milk pipes – 4 pieces;
- V-shaped spare belt.
The equipment is supplied in reliable plywood packaging.
Specifications
Models 1P and 2P are characterized by the presence of similar parameters:
- total productivity – from 8 to 10 heads per hour;
- The engine is powered from a 220 volt network;
- motor power 550 W;
- pressure in the system – from 40 to 50 kPa;
- pulsation occurs at a frequency of 64 cycles per minute;
- milk container capacity is 22.6 liters;
- weight without packaging of model 1P is 45 kg, model 2P is 47 kg.
The manufacturer provides a 1-year warranty. The contents of each model may vary.
Instructions
Milking units 1P and 2P are used according to the operating instructions. Each start is carried out with the idle start button.After checking the functionality of the system, cups are placed on the teats and secured to the udder with suction cups. The device is given another idling time of 5 minutes until the operating pressure in the system rises. The indicator is determined using a vacuum gauge. When the pressure reaches normal, the vacuum reducer is opened on the lid of the milk container. Through the transparent walls of the hose they are convinced that milking has begun.
Milking equipment works according to the following principle:
- The upward moving piston of the pump opens the valve. Air under pressure is directed through hoses into the cup chamber. The rubber insert is compressed, and with it the cow's udder teat.
- The reverse stroke of the piston provokes the closing of the pump valve and the simultaneous opening of the valve on the can. The created vacuum releases air from the chamber of the glass. The rubber insert unclenches, releases the nipple, and milk is expressed, which is directed through the hoses into the can.
Milking is stopped when milk stops flowing through the transparent hoses. After turning off the motor, release the air pressure by opening the vacuum valve, and only then disconnect the glasses.
Conclusion
The Dairy Farm milking machine takes up little space, is compact, and mobile. The equipment is suitable for use in private households and on small farms.
