Are parsley seeds soaked before planting in open ground?

Content

1 Do I need to soak parsley seeds before planting?
2 Advantages and disadvantages
3 How to prepare parsley seeds for planting
4 Selection of capacity
5 How to soak parsley seeds for faster seed germination
6 Other methods for quick germination
7 Conclusion

Preparing parsley seeds for planting necessarily includes soaking. This procedure stimulates the rapid germination of planting material and the appearance of friendly shoots.

Do I need to soak parsley seeds before planting?

Parsley can reproduce by self-sowing, turning into a weed, without losing its taste and beneficial qualities.

The soaking procedure before sowing has a number of advantages:

increases the speed of sprouting of spices;
germinated seedlings yield their harvest together.

Advantages and disadvantages

Compositions for germinating seedlings additionally disinfect them. They also remove excess essential substance, which protects seeds from premature germination.

Experts say that it is not necessary to soak the seeds before planting.

Pros:

ensures rapid germination of the crop;
after the procedure, the above-ground and underground parts grow better (although parsley is more often used in culinary recipes, there are housewives who prepare root vegetables for the winter).

Minuses:

The crop germinates well even without soaking. If you plan to sow grass before winter, then it is better not to carry out the procedure;
when parsley is grown from the root, the method does not give results;
the natural protection of planting material is disrupted. The sprouts will die if there are frosts or pests appear on the site.

How to prepare parsley seeds for planting

To obtain maximum yield, parsley should be prepared:

Planting material is sorted out, small and damaged seeds are discarded.
Soak in a saline solution to check which seeds are suitable for planting. Empty and unripe ones will float to the surface. Those that have fallen to the bottom are suitable for sowing. They are dried, stimulated and embedded in the soil.

Selection of capacity

Selecting containers will not take much time. You can use any available utensils.

Suitable for soaking:

hermetically sealed containers;
containers for growing seedlings;
snack plates.

How to soak parsley seeds for faster seed germination

To soak the seedlings you will need:

Gauze or fabric, the main thing is that the prepared piece allows moisture and air to pass through.
Planting material.
The working solution in which the seeds will be soaked.

Containers with planting material are placed in a dark place. The optimal temperature should be within +20…+25ᵒС. On forums, gardeners share tricks about soaking. They recommend placing soaked seedlings in a plastic bag, creating a greenhouse effect.

During soaking, seedlings do not need to be provided with oxygen. It will take 24 to 48 hours for parsley seeds to swell.

Soaking parsley seeds in milk before planting

Subtleties you should know about when soaking planting material in milk:

preference should be given to a whole country product rather than a store-bought product, which is obtained from powder;
If the milk has been stored for more than 48 hours before soaking, it is not suitable. Placed in a warm environment, it will begin to sour, forming a film on the surface of the planting material. Perhaps this is a good option for other seeds, which will protect them from damage by pests, but it is not suitable for parsley.

Before the procedure, milk is poured into a transparent container; greasy, whitish traces should remain on the walls.

Algorithm for carrying out manipulations:

Calibrated, selected seeds are placed in a shallow container.
The milk is heated to 40ᵒ (the product should be quite hot, but not boiling), and the planting material is poured over it.
The container is left in a warm room for 12 hours
Then the seedlings are filtered and laid out on a paper towel or toilet paper to dry for several hours. After this they are ready for sowing.

Important! Parsley seeds soaked in milk (pictured) should be kept for a strictly specified time.

If you overexpose them, the product will begin to sour. In a fermented milk environment, flora is formed that has an unpredictable effect on planting material.

Soaking parsley seeds in vodka before sowing

There are no special requirements for the choice of vodka for the soaking procedure. Any alcohol-containing liquid with a strength of 40 revolutions will do. If you don’t keep vodka in the house, you can dilute the alcohol to 35-40ᵒ.Stronger alcohol will only harm the planting material.

Soaking algorithm:

Vodka is poured into a shallow container.
Seeds are placed in it, previously poured into a gauze or fabric bag.
After dipping into vodka, it should completely cover the planting material.

Processing time should not exceed 15 minutes. This period is enough for the ethereal shell to dissolve and the seeds to undergo disinfection. If the time spent by parsley in alcohol is exceeded, the planting material will either burn or be preserved.

After removing the bag, the liquid is allowed to drain.

Before planting in the ground, seeds are washed several times under running water.

Soaking parsley seeds in water

The simplest method of soaking, which does not require additional costs, is in water.

How to carry out the procedure correctly:

Choose a container. It should be roomy enough to accommodate the entire batch. At the same time, the container cannot be too deep. The layer of liquid above the seeds is from 3 to 5 cm.
The bottom of the container is covered with cloth or gauze folded in 4-5 layers.
Lay out the parsley seeds and pour in fairly hot, but not boiling, water. The liquid temperature should not exceed 70-80ᵒ.
Cover the container with a lid and leave in a warm room for 24 hours so that the water cools gradually. During this time, the seeds swell and the essential oils evaporate.
After 24-48 hours, parsley is sown in the soil.

Important! For this method, be sure to use hot water. A liquid at room temperature will not do any good, since the essential oils will not dissolve.

Soaking parsley seeds in a solution of potassium permanganate for better germination

Potassium permanganate additionally disinfects seedlings and also dissolves essential oils.

How to properly dilute potassium permanganate and soak the seeds:

Prepare a weak solution of potassium permanganate. To do this, dilute a little product in 0.5 liters of warm water.
The seed material is poured into a shallow container. Fill with the prepared solution.

Soak in potassium permanganate for 40-45 minutes

After which, without washing, the parsley is sown in the ground.

Soaking parsley seeds in hydrogen peroxide

Hydrogen peroxide is also suitable to dissolve volatile compounds from the surface.

Soaking algorithm:

Choose a shallow container of a suitable size.
An antiseptic is poured into the container and left for 15-20 minutes. place parsley seeds folded in a fabric bag.
The planting material is washed.
After this, prepare a solution of hydrogen peroxide. Dissolve 1 tbsp in 1 liter of water. a spoonful of antiseptic.
The liquid is poured into a container. The seeds are soaked in it for 24 hours.

Planting material is removed from the solution and sown in the ground. Rinsing in running water is not required.

Soaking parsley seeds in a growth stimulator for quick germination

To increase the immunity of seeds to unfavorable conditions, the chemical industry produces growth stimulants. They increase the germination rates of planting material.

Recommendations for soaking parsley seeds in a growth regulator:

A highly concentrated solution of vermicompost is diluted at a rate of 1:20. Planting material is kept in liquid for no more than a day.
Potassium humate solution. 0.5 g of the drug is dissolved in 1 liter of water at room temperature. The seed material is poured into a linen bag and placed in the solution for 24 hours. During this time, it is recommended to shake the liquid several times.
Soaking in Epin solution. To obtain a concentrate, dissolve 4-6 drops of the drug in 100 ml of boiled water cooled to 23°C.Seeds poured into a fabric or gauze bag are placed in the liquid for 18-24 hours.

After soaking in chemically active preparations, the planting material is dried, but not washed.

Other methods for quick germination

In addition to store-bought growth solutions, gardeners use alternative means for soaking parsley seeds, and also resort to other preparation tricks.

Two options to increase germination:

Soaking in a mushroom infusion, which is prepared from a dried product, pouring a small amount of hot water over it. When the liquid has cooled, the seedlings are placed in it in a gauze bag for six hours.
An infusion of wood ash is prepared from 2 tbsp. spoons of product and 1 liter of water. After mixing, the product is infused for several days, then the planting material is immersed in it for 3-6 hours.

There is a trick on how to germinate parsley seeds without soaking. To do this, dry seeds are poured into a fabric bag. For 14 days, they bury it in unheated soil to a depth of 30-35 cm. Before sowing, the seedlings are removed from the soil, dried, and sifted.

One way to revive seeds is bubbling. The principle of the method is to place the seed material in water, which is constantly saturated with oxygen. This procedure helps wash away the layer of essential oils.

Conclusion

Preparing parsley seeds for planting by soaking is an important but optional procedure. It increases the percentage of germination of planting material and improves the quality of the harvest. At the same time, soaking requires the gardener to spend time preparing the solution, soaking, washing and drying.