How to build a fountain at your dacha with your own hands

Modern landscape designs include a large number of various buildings and elements that allow you to create a piece of paradise in your local area. For example, a fountain, even the smallest one, will give your site some originality. If you're thinking about undertaking a project like this, don't be intimidated by it. It’s quite possible to make a fountain for your dacha yourself. To do this you need to apply ingenuity and a little desire. This article has also been prepared to help. From it you can learn how to build a fountain with your own hands.

Why do you need a fountain?

Mainly, the fountain makes a lasting impression on all the people at the dacha. After all, everyone knows the fact that you can watch water flow for hours. Therefore, if you regularly have guests at your dacha, then such a structure will give your communication more intimacy. Just look at the endless murmur of water.

Plus, relaxing near the water is beneficial. The water element will fill you with positive energy to accomplish new ideas. Water also relieves stress, fatigue and gives peace of mind and tranquility. You will truly feel harmony with the world around you.And if you supplement this building at the dacha with original lighting, beautiful figurines, etc., you will end up with a very original picture. Just imagine, at night or in the evening the water falls and shimmers in different colors. This is truly a fascinating sight. It seems that these reasons are enough for you to understand that there should be a fountain in the country!

Where to install

If you are interested in creating a fountain, then first of all you need to determine the place where it will be installed. It should not be installed in direct sunlight. Otherwise, this may lead to the water simply starting to bloom. And due to frequent changes, water consumption will also increase significantly. This is good if you have an autonomous source of water, and if it is a city one.

Among other things, it is not recommended to place trees near this reservoir, or rather vice versa. Falling leaves and branches from a tree will quickly pollute your fountain. The worst thing is that tree roots can destroy the entire structure of the pond. For this reason, choose a location as far away from trees as possible.

It is preferable to place a decorative fountain for a summer residence in a recreation area. It is very good if the outdoor fountain is located in an area of ​​the garden where it can be fully visible. So, if you have already decided on the location of the future fountain, you should pay attention to the decorative aspect.

Fountain shape

Do-it-yourself fountains in the country in the photo in this article are presented in different types and forms. If we talk about the most common fountains for the home, then these are jet fountains. This means a fountain in which the stream is directed upward and can be divided into several streams.This is the classic and simplest option for organizing a mini-pond with a fountain in your country house.

A fountain for a pond in a country house can have a strict square or round shape. There may also be oval shapes or with several angles. As for additional decorative figures, he does not always need it. Usually it is enough to indicate its boundaries with a beautiful side. Plus, it is important that this structure fits beautifully into the overall landscape design and matches the style of the dacha. That is, if your local area in your dacha is very small, then you should not build a huge fountain that will attract all the attention. It should be a complement to the whole picture.

Varieties

Before you make a fountain at your dacha with your own hands, you also need to decide on its appearance. Today there are 3 main varieties of it:

  1. Submersible.
  2. Stationary.
  3. "Falling Water"

The easiest to implement of all of these is submersible. It differs in that the stream of water shoots directly from the reservoir. A submersible pump is lowered to the bottom of the reservoir, and the nozzles for creating the jet can be very different. The height of the jet is determined by the power of the pumping unit. Such a fountain can be small in size.

As for the stationary one, it is much more difficult to build it. Typically, such a building includes statues, sculptures and all kinds of decorative elements. Of course, it is more difficult to make, however, visually, it will look much more impressive than a small submersible fountain in the country.

“Falling water” means a combined composition that includes a small waterfall and a fountain. That is, a stream of water does not just fall on the water, but is directed towards a cascade of stones.The water returns through them and circulates in a circle throughout the pump and the entire reservoir.

Preparatory activities

It is important to understand that it is very difficult to make a fountain with your own hands in the countryside without a pump. For this reason, it is first necessary to select a suitable pump that can pump the required volume of water. When it comes to choosing a pump, it is important to consider some features. If the pond at your dacha is small, you should not purchase a very powerful pump. Otherwise, the stream of water will rise very high and spray around the area. On the other hand, a pump that is too weak in a large reservoir will create a small stream, but in fact more is possible.

In addition to the pump, other material is also needed. For example, polyethylene, which spreads along the entire bottom of the reservoir. River pebbles are also needed to line the bottom and edges. Depending on your idea, you may also need sand. There are actually quite a few ideas. In this article you can find fountains in the country house in the photo in different designs. Here you can use old rubber tires from a car, ceramics, glass and much more.

Advice! The selected material for making a fountain at the dacha with your own hands must be resistant to sudden temperature changes.

Among other things, a special reservoir for hydraulic equipment and water is required. You can buy a tank ready-made or make it yourself. To do this, all work is performed in the following sequence:

  • Dig a pit of the appropriate shape.
  • Place a small layer of sand at the bottom of the hole and reinforce its side walls with bricks.
  • After this, the entire pit should be covered with plastic film. It is important that the film is solid.
  • It is necessary to temporarily fix the film along the upper edge. After this, fill the bottom of the pit with decorative stones. This way the polyethylene will be securely fixed. It is not recommended to use stones with sharp edges. They may damage the film.
Advice! In order to prevent the water level in the reservoir from rising, it is imperative to construct an emergency water drain.

Installation of pumping equipment

So, if the pit is completely ready, then you should begin installing the pumping unit. The principle of operation of the pump here is very simple. Water is thrown into the tank through the nozzle, it enters the pipeline, undergoes coarse and fine cleaning, and then the purified water passes through the nozzle again.

The pump installation method depends on the type of equipment. The pump for a fountain in a country house can be submersible. In this case, it is located in the center of the reservoir. It does not need to be secured in any way, since it has a certain weight. It is ideal for small fountains in the country. There is also a surface fountain. Based on its name, it is obvious that it should not be immersed in water. It is located on the surface in close proximity to a pond and a fountain in a summer cottage. Pump connection should be carried out in accordance with the existing instructions from the manufacturer. This is the scheme used to make a decorative fountain at the dacha. Now we invite you to consider another original solution for making a fountain.

Polystone fountain

Polystone is an artificial stone. It simultaneously combines elegance and sophistication, which makes this material popular in the manufacture of fountains. Mostly, ready-made polystone figurines are sold at the market or store.You should choose the right one and deliver it to your plot of land.

A special tank is also made for installation. So, the finished figurine can be installed in the center of the reservoir. A filter must be installed on the pumping equipment, which will keep the water clean and free of any unpleasant odor. Garden fountains for a dacha made of polystone will become a real decoration of the entire landscape design.

Conclusion

So, as we have seen, a fountain made in a country house will be an excellent addition to landscape design. You can do it yourself. The prepared video, which is located at the end of this article, will also help you with this work. We hope that this material helped you dispel the myth that it is impossible to make a fountain with your own hands in the country!

Leave feedback

Garden

Flowers